Static Equipment Specialist

Position Description :

• Skills are typically acquired through a graduation in Mechanical or allied Engineering with a minimum of 12 years of demonstrated experience and average experience ranging from 12 - 18 years.
• Hands-on experience with FEED and EPC / EPCM activities including but not limited preparation of Material Requisition, Technical Specification, Design using ASME, API and other International Codes / Standard, Mechanical Data Sheets, Supplier offer review, Technical Bid Evaluation, Vendor Documents Review and Interfaces with Inter disciplines as required. At least 8 years of experience in EPC is preferred. Experience in fabrication Industry is a plus.
• Experience in PMC projects (a plus).
• Experience in the mechanical design of heat exchangers (a plus).
• Shall be able to lead a team of Engineers / Designers and to effectively communication / work with other KBR Centers and Client; Willing to work as a Requisition Engineer as well if Project demands; Responsible for the hours estimate and hours allocation to the resources allocated to Project, based on the tasks and effective completion of the tasks within budgeted hours.
• Good oral and written communication skills.
• Good attitude and able to work as a team player resolving all conflicts that may arise.
• Worked with process equipment in the shop or field (a plus).
• Participation in the inspection of equipment at shop or field (a plus).
• Experience in material selection per process requirements in compliance with various national and international codes and standards.
• Expertise in software used in the design of pressure vessels such as DISASU, PVElite and / or COMPRESS.
• Expertise in software used in design of storage tanks such as AMETANK.
• Good knowledge of NACE compliance and lethal service requirements.
• Working Knowledge of FEA using software like ANSYS, Nozzle Pro etc (a plus).
• Exposure to European codes for process and storage equipment (a plus).
• Working knowledge of wind and seismic analysis using various National and International codes, standards and case studies.
• Working knowledge on re-rating of process equipment, repair and re-qualification of fabricated equipment.
• Knowledge of NDT requirement, code stamping and WPS / PQR preferred.

Skills Required

Mechanical Engineering, FEED, Epc, Material Requisition