Lead Field Service (17 / 10 / 2025)

Job Description Summary

As Lead Mechanical Process Commissioning Engineer, you shall be responsible for :

Cold and hot commissioning activities for Steam Turbine and generator & associated auxiliaries in a safe manner, according to the quality rules in force on the project and the project schedule.

Responsible for the preparation and execution of the commissioning, trial run, acceptance testing and inspection / measurements within his / her scope of work as defined by Engineering.

In depth knowledge of cold-commissioning and hot commissioning activities of ST-G systems

Experienced in testing and Calibration of Moog EHC for valve stroking and tuning.

Analysis & providing technical solutions to process commissioning problems being encountered / identified by Thermal Power Utilities in consultation with Engineering.

Job Description

Roles and Responsibilities

• Working as Technical Lead for Mech. Process commissioning related tasks in assigned Core service / retrofit outages of STG including dealing with all technical & safety matters related to outage execution, owning the customer relationship during outage duration, and driving customer issues resolution within outage schedule.
• Implement and ensure compliance as per GE Vernova standards, laws & regulations during outage execution.
• Perform all commissioning activities – cold and hot – related to Steam Turbine, Generator and auxiliaries in accordance to OEM engineering & safety guidelines and Quality procedure, with address to all statutory regulations and environmental protection measures in place.
• Knowledge of steam turbine systems and auxiliaries' commissioning – Lubricating oil, jacking oil, control oil, Steam admission valves, bearings, drain & vents systems, Bypass, gland steam, mechanical control and protection, shaft monitoring, etc.
• Reporting of deviations from the agreed goals and further initiating corrective measures with support from Service Engineering / retrofit engineering.
• Preparation & Performing Commissioning in a safe and timely manner as specified in the work instructions.
• Developing commissioning schedule for cold & hot commissioning, prepare commissioning Inspection & Test plans for outage, testing procedures, protocols, and reports of equipments for STG and associated auxiliaries as needed.
• Raising ER Case for remote engineering support in handling technical problems related to commissioning and its timely resolution to meet Unit commissioning deadline as per defined outage schedule.
• Ensuring the commissioning, operation, quality record and feedback documentation are issued & ensuring that technical deviations are reported with a corresponding non-conformance report (NCR) and that the same are followed up until their completion.
• Maintain logbooks to record commissioning daily work, operational events, rectification logs, punch list etc as specified in the work instructions.
• Manage the handling and inspection of the commissioning test equipment.
• Support and train other Commissioning Engineers assigned to him / her.
• Participate in site outage meetings organised by Site lead.
• Train the customer staff in operation and maintenance as per contractual obligations.
• Prepare Commissioning outage report, provide technical experience feedback_Lesson Learnt during Outage close-out in accordance with outage End to End Process

Required Qualifications

Desired Characteristics

Behavioural Skills :

Mobility Requirements :

Additional Information

Relocation Assistance Provided : Yes