Staff Engineer- EMI-EMC Simulation

Work Flexibility : Hybrid

What you will do :

Interact with the various product development teams and understand the requirements for SI / PI / EMC / EMI / Motor simulation

Perform the SI / PI / EMC / EMI analyses using the commercial tools, e.g., ANSYS, Mathwork and Cadance

Model preparation, Pre & Post layout analysis and the interpretation of the results. Verify the results for accuracy and convergence

Validate the analysis results against closely equivalent international standards, experimental results or analytical solution as available

Develop methods, tools, and procedures to shorten the simulation time for complex problems

Create analysis reports, reference manual and lessons learnt document

Participate in simulation workshops, forums, training & conferences both internal & external

What You need

Must have skills :

Strong Electronics Basics, with knowledge of Digital / Analog / Mixed / High speed signals, multi board simulation, Motor simulation, thermal simulation, battery simulation and Antenna simulation.

Good knowledge of interfaces like DDR2 / 3 / 4 / 5, RS232 / 422 / 485, SPI, I2C, NAND / NOR Flash / PCI express / SERDES.

Should be aware of signal integrity issues i.e. effects of packaging, board parasitic, crosstalk, noise, grounding and shielding etc.Should have knowledge of power integrity issues like IR drop and decoupling analysis.

Good knowledge of system level simulation like Radiated emission simulation and conducted emission simulation and ESD simulations. Should have experience in simulation of different types of motors including PMDC and BLDC motors.

Experience : 6-9 years in electrical simulation - SI / PI / EMC / EMI Analysis

Good to Have skills

Experience in board thermal management and battery simulation.

Prior experience in medical domain and EMI / EMC physical testing is a plus.

Education :

B. Tech. / M.S in Electronics Engineering

Travel Percentage : 10%