Substation Design Expert ( 4 yr to 16 Yr Exp) ( Electrical / Civil )

Company - Listed EPC Company

Department - Engineering Design

Designation - Open and can discuss at the time of the Interview

Qualification - Electrical / Civil (Engineering Graduate )

Range of Experience - +4 years to 16 Years and above

Location - Kolkata / Mumbai

Summary -

Minimum of 4 to 16 years of experience in Design and Engineering of GIS and AIS Substations projects for voltage level of 66 kv and above upto 765 KV.

KEY ACCOUNTABILITIES

Pre-Bid Design -

a. Carrying out HV / EHV substation design and drawings for both AIS and GIS substations, including preparation of equipment specifications, layout drawings, and calculations (such as short circuit force, earthing, direct lightning stroke protection, conductor sizing, CT / CVT sizing , battery sizing, etc.). Also responsible for sizing equipment designs and systems, and BOQ preparation.

b . Knowledge of standards (IEC, IEEE, ANSI). Experience in designing substations from 66kV to 765kV EHV substations, switchyard layouts, and switchyard equipment design is essential.

c. Proficiency in AutoCAD software is required.

d . Knowledge of software such as ETAP, CDEGS, etc., is preferable.

e. Must be able to work independently on projects.

f. The candidate should possess good communication skills and be capable of discussing issues with customers and vendors.

Execution of Contracts -

1.  Shall be able to prepare / guide the design team in preparing the SLD, general arrangement drawings, electrical layout, sections, EKD, DSLP, Earthing Layout, cable trench layout, switch yard illumination, cable schedule, bill of materials (BOMs), etc. Should be well-versed in various busbar schemes.

2 -Should be able to review the equipment vendor's drawings / documents. Should also be able to guide the design team to review the equipment vendor's drawings.

3 -Should be able to interface with control and protection requirement,s and knowledge of review of schemes is desirable.

4 -Should be well versed with design calculations for Earthing design, Sag tension, DSLP, Short circuit forces, battery sizing calculation, equipment sizing, etc.

5 -Should be able to monitor the progress of work closely (both Projects as well as tenders) of the design team. Should also ensure that the projects / tender deliverables are delivered on time, without delay.

6 . Should be able to handle / monitor the draftspersons.

7 -Should be able to coordinate with civil design engineers wherever interfaces.

Education

Bachelor Of Technology (B.Tech / B.E)

Skills Required

Design, Sld, Single Line Diagram, Substation Design, ais, Gis