Specializing in both Hydraulics and Hydrology disciplines, are responsible for Review of Hydrological Studies and Hydraulic Designs for Hydro Power and Pump Storage Project components (Intake, Dam, Barrage, Energy dissipation arrangement, Spillway, Desilting Basin, HRT, Pressure Shaft / Penstock, Upstream Surge shaft and downstream Surge Chamber and Tail race system) and finalize the General Layout arrangements of the Projects. Understanding of technical specifications for Tender projects and Review of hydraulic design reports as per IS codes, CEA / CWC guidelines, CBIP and USBR Guidelines etc.
- Review and preliminary hydraulic designs for hydraulic structure like Dam, Barrage, Intake, Water conductor system etc.
- Developing initial ideas for Planning and designing of Hydro project and PSP
- Water Availability studies and Power potential studies
- Surge Shaft
- Quantity estimationNumerical analysis in HEC RAS Software (1D and 2D)Numerical analysis in 3D Software (like flow 3D Hydro)Reservoir sedimentation studies for fixing new zero elevation of the reservoir and long-term siltation profileTransient analysis (Whamo OR Hammer)Desilting chamberEnergy dissipation arrangement Reservoir planning, Various zones of reservoirs, Area-elevation & Storage elevation curve, Design storm studies, Standard Project Flood (SPF), Probable Maximum Flood (PMF). Guidelines for selecting design flood Hydrograph analysis, Separation of stream flow components, Unit Hydrograph, Synthetic Unit Hydrograph, Peak flood estimation at site, Flood Frequency analysis, Selection of design return period, Annual and partial duration series, regional flood frequency analysis, Reservoir and channel flood Routing. General layout of water conductor system andHead loss calculationPowerhouse DrainageWater Surface Profiles in RiverDam Break Studies and Flood Damage MitigationInitial filling Plan for reservoirRiver Diversion arrangements which include coffer dams and diversion tunnel or channelCross drainage structures, Guide bunds and Flood Protection embankmentsWater availability studies and G&D measurementsDesign and Diversion Flood StudiesPower Potential studiesUnderstanding of topographic and bathymetric surveyGeographic information systemUnderstanding of Physical model study for Hydraulic and Reservoir sediment modelSoil and Rock Scour CalculationUplift Pressure CalculationDepth of cut-off and Protection worksPreparation of Design Basis and Hydraulic design ReportsHydraulic studies for reverification various levels like Top level of Dam / Barrage, Spillway invert level, Sizes of Spillway bays, Dimensions of Energy dissipation arrangement and Intake invert.Pressure transient analysis of the system is carried out to check and optimize the suitability of upstream surge shaft and downstream surge tank. Hydrological studies for the project covering Water availability Flood studies Sedimentation studies in the reservoirHydrological and Hydraulic calculation of Cross Drainage Structures (Bridges and Culverts)Comprehensive drainage system for Roads of Project Area Performing calculations and simulations to evaluate the performance of the Hydro-Structure systems, including 1D, 2D and 3D analysis, Power potential calculationsComparison of Numerical and Physical Model StudiesFormulation of Numerical models and conducting thorough analysis to identify any design flaws