We are looking for a satellite avionics lead to lead a team responsible for the architecture, design, integration, and validation of satellite avionics across both electronics hardware and embedded firmware. The role covers OBC, EPS/power interfaces, sensor, communications and actuator electronics, FPGA/MCU-based control boards, bare-metal and RTOS-based embedded software, qualification testing, and subsystem delivery from concept to flight readiness.
Responsibilities
- Lead end-to-end avionics architecture for command and data handling, OBC, power interfaces, telemetry, health monitoring, and payload/control electronics.
- Lead a team responsible for schematic design, PCB layout review, power-tree definition, mixed-signal interfaces, protection circuits, connector selection, and harness architecture.
- Develop and maintain embedded firmware in C/C++ on bare-metal and RTOS-based platforms for real-time control, telemetry, task scheduling, inter-task communication, fault handling, boot and update flows, driver development, and subsystem operations.
- Drive board bring-up, hardware-software integration, FPGA/MCU interfacing, interface debugging, root-cause analysis, and lab validation using standard electrical test equipment.
- Ensure EMI/EMC-ready avionics design and firmware-aware integration through proper grounding, shielding, filtering, PCB layout, return-path control, harnessing, and test support.
- Drive component selection, design trade-offs, reliability/FMEA inputs, manufacturability, vendor coordination, and subsystem-level technical decisions for mission needs.
- Prepare and review requirements, schematics, BoMs, interface documents, test procedures, qualification plans, verification reports, and integration plans.
- Work closely with mechanical, GNC, software, EPS, payload, manufacturing, and AIT teams while mentoring junior engineers and driving subsystem closure.
Requirements
- Bachelor's or Master's degree in electronics, electrical engineering, embedded systems, avionics, aerospace, or a related field.
- 5+ years of hands-on experience across electronics hardware and embedded firmware development, including bare-metal and RTOS-based systems, for high-reliability or mission-critical applications.
- Strong experience in schematic design, multi-layer PCB design/review, board debugging, mixed-signal electronics, power interfaces, and FPGA-based digital design or integration.
- Strong programming skills in C/C++ on bare-metal and RTOS-based embedded platforms, including task scheduling, synchronisation, inter-task communication, driver development, interfaces, and real-time firmware architecture.
- Good understanding of MCU/FPGA/SoC platforms, I2C, SPI, UART, CAN, RS-422/485 ADC/DAC, sensors, actuators, regulators, and power electronics.
- Strong understanding of EMI/EMC, grounding, shielding, noise mitigation, and mixed-signal hardware debugging; SI/PI awareness is a plus.
- Prior experience in satellite, spacecraft, launch vehicle, defence, or other mission-critical embedded systems.
- Experience with environmental testing, qualification hardware, FPGA-based systems, firmware verification, manufacturing handoff, and flight or high-reliability development.
This job was posted by Keesari Sai Divya from Cosmoserve Space.
Skills Required
regulators , shielding , I2c, Spi, Uart, Emc, Can, Dac, C, Power Electronics, Sensors, Emi, actuators, grounding, Schematic Design, Adc
