Network Engineer

Job Responsibilities :

1. Cleaning tools testing, reporting, install cables or optics for new circuits. physical cabling,

cable management, northbound cabling, (Fiber / Copper / Power).

2. Support network and server teams by assisting with rack and stack and running cables.

Planned / Predictive maintenance or circuit migration support

3. Labelling, patching, and asset tagging activities, perform installation as needed either

through physical or network medium.

4. Follow specific task instructions and provision necessary reporting as necessary and support

either through phone, remote tools, or in person at onsite.

5. Conduct failure analysis, perform functional testing of entire system / Identify failed

Component planned maintenance or circuit migration support.

6. Reseating or swapping new line cards

7. Making, crimping and testing RJ45 Copper Cables

Break Fix / Technical Task List :

1. Cleaning Fibers, replace the faulty optical cable. Installing loopbacks, BER testing

2. Inserting / removing / replacing defective components. Line cards, Fibers, etc... Assist with fault

diagnosis and investigation with RMA Processing.

3. Configuring remote access, basic storage array configuration, replacing faulty cables.

4. Rebooting line cards, chassis or reseating of cards / optics

5. Providing loop-back cables to test circuits remotely, re-seating or replacing components or

cables

6. Power cycling and conducting whole unit replacement.

Preferred Skillsets : Technical Experience :

1. hands-on experience in installation and troubleshooting Infrastructure (DC & Network)

equipment's, rack, and stack of the equipment / cable.

2. Infrastructure (Data centre and network) hardware architecture as to understand the

procedure shared by L3 teams during troubleshooting, HS&E support

3. Knowledge of Nokia, Ciena Hardware.

4. Understanding of ILA Hut jobsites

5. Good understanding of IT principles such as networks, hardware.

6. Fiber / Data / Copper cable installation and maintaining; include working with MPO fibers.

7. Hands-on experiences in IMAC and break-fix activities related to infrastructure environment.

8. Ability to identify defective spares and replace them with provided good spares as instructed

and by physical observations.

Skills Required

Planned predictive maintenance, Circuit migration support, Basic storage array configuration, Copper cable installation