Engineer - Piping (Stress)

Job Description

1. To perform Stress analysis, Design calculations of various piping system using Caesar-II.

2. Checking of Piping drawings, Isometrics, support drawings.

3. To prepare critical line list as per process / project requirements.

4. Stress analysis of piping system connected to critical equipments such as compressors, pumps and steam turbine to review of piping force & moments.

5. Stress analysis of piping system connected to critical stable equipments to review pipe line.

6. Carrying out all calculations related to displacement of various equipments, branch reinforcement calculation, PSU reaction force calculation, slug force, trunnion calculation, flange leakage test for high temperature lines etc. preparation of piping load data & platform load data.

7. Selection of support as per project requirement (guide, hold down, anchor, spring hanger, struts, clamps etc)

8. Perform stress analysis of pipe rack and produce support load report to structural.

9. Preparation of stress analysis report, support design and mark ups on piping Isometrics

10. Review of vendor drawings and co-ordination with other department.

11. Analysis of systems to ensure stress, loads and displacement are within the limit as per project requirement, recommendations for modification.

12. Creativity and presenting stress reports as per the client requirement.

13. To coordinate with piping and other disciplines and ensure that they get the necessary inputs on time.

14. Any other relevant activities as defined by the Manager / Lead."

Requirements

Expert Engineer, Piping, Stress , CAESAR ||