15h Left : Scada Engineer

SgurrEnergy is one of the leading renewable energy consulting companies that has worked on over 160GW of renewable energy projects globally. In South Asia SgurrEnergy has consulted over 12GW of utility scale solar PV plants that are either constructed or under implementation.

Owing to the continued growth and high demand for its services, SgurrEnergy’s Anand office intends to recruit SCADA / Substation Automation Engineer Automation SME (Subject Matter Expert) within its Engineering team.

Position Title : Electrical Engineer / Sr. Engineer.

Reporting To : Team Leader / Manager

Work Location : Anand, Gujarat

Employment Type : Permanent

Qualification : Minimum BE / B Tech.

Experience Level : Minimum 7-12 years of experience in SCADA system Engineering

Hiring Time Frame : Within 15-30 Days

Key Skill Sets : Proficiency in activities mentioned in Key Responsibilities

Job description :

The principal responsibilities essentially include :

• Able to prepare SCADA system architecture based on Overall SLD, project configuration, and as per utility guidelines.
• Shall be able to understand MV Panel and control relay panels drawings / schematics.
• Able to prepare complete technical specification / RFP documents as per project requirements.
• Able to prepare IO list, communication cable schedules, and control logic writes up.
• Shall be able to verify technical compliance of Hardware and software systems.
• Shall be able to do Factory acceptance test independently as per approved documents.
• Shall have knowledge on basic of Protection of substations, power transformers, and generators
• Shall have knowledge on different architectures RSTP, PRP, and HSR.
• Shall have Knowledge on Ethernet Switches, Router, and Firewall.
• Shall have knowledge of the different types of communication Ethernet, Fiber optic, Serial RS232 / RS485, PLCC.
• Shall have Knowledge of Substation Automation and Communication Protocol SNMP, SNTP, Modbus, IEC60870-5-103, IEC61850, IEC60870-5-101, and IEC60870-5-104.
• Shall have Knowledge of RTU, SAS, and HMI functionalities.
• Shall have knowledge of PLCC and FOTE system.
• Shall have knowledge of Cyber security, CEA grid compliance and Load Dispatch Centre Interface of Plant.
• Candidate have worked in renewable energy projects specifically EHV Substations up to 400kV, Solar, Wind, BESS shall be preferred. However, other industries candidate like Process, Oil & Gas may also apply.